跳至主要内容

What is a third party shipment inspection?

A third party inspection is an unbiased, independent, and specialized 3rd party inspection company, other than the buyers or the seller to perform the inspections, tests of the products. It has great advantage over the cost, skill, experience, overheads, energies, and convieniences.


There are various inspection types for various production stages:


The inspection company will contact the sellers to set up the inspection, confirm the date and address.

The 3rd party inspections are normally have the following checklist in onsite inspections:

INSPECTION CRITERIA
A. Quantity Check
B. Shipping Marks and Packing
C. Label, Logos and Colours
D. Product/Material & Sizes
E. Onsite Tests: functions, industrial & safety
F. Client’s Requirements
G. AQL Workmanship (Visual Defects) 

There is a standard inspection process defined the sample size, allowed defect rate, and inspection procedures. The sellers can also name their inspection requirements, test requirements, seal some random samples to send to test, or for reference.


The info needed for the inspection would be PO or PI info, packing list, packing requirement, technical drawing, artworks, special requirement, and the seller's contact info.


We are a specialized third party product quality inspection company with operations covered China, India, Thailand, Malaysia, Vietnam, Bangladesh etc.


We will represent you to do inspection on your behalf unbiasedly.

Please find below for an example of the inspection standard we used commonly:

INSPECTION Standards
Sampling standard ISO 2859-1(Mil Std 105E) AQL level level II: (letter code: N)
Critical/Major/Minor defects Not Allowed/2.5/4.0 Sample size for Cri/ Maj /Min 500/500/315

Please find below for more info about the third party inspection services:



标签：

评论

发表评论

此博客中的热门博文

Why most inspections are Final Random Inspections

from:  Why most inspections are Final Random Inspections For most Pre-shipment inspections , how come most of them are Final Random Inspection , instead of full check, initial inspection, during production inspection ? Normally for common consumer products, we recommend Final Random Inspection s when production is finished, and the products are fully packed into the cartons and are ready for shipment. It is cost-effective to make sure the product quality is up to the acceptable level statistically. Most of the inspections are done in this way, 1 man-day should be enough. If the result is failed, the factory need to recheck, rework the whole batch, and pay for a re-inspection.   We do have a During Production Inspection , when 20-30% of the production is finished. This is to find any nonconformities earlier. Mostly for big and important orders, new designs, complicate products etc. It is also a random check. A final inspection would be followed normally.   We recom...
发表评论
阅读全文

Factory Quality Inspection Services

 What is a factory inspection service? For  inspection , you go down to the factory and  check the product quality levels  before shipment, but normally you do not need to check all of the products piece by piece, it is the manufacturers job, they are supposed to check all of them and make sure everything is ok.  We just need pick some of them randomly, according to  AQL , and inspect if everything should be supposed to be:   Below are some of the inspection services that can be done, and should be done to check the products during different production statuses:   Ctstek.com inspection services include:     -   Initial Production Check     -   During Production Check     -   Pre-Shipment Inspection     -   Final Random Inspection     -   Container Loading Supervision     -   Production...
发表评论
阅读全文